Contact usSign up
HomeCut List
04Cut · Cut List

Exact panels for the saw. Less plywood in the scrap pile.

Once a design is approved, Cut List breaks every module into panels with sizes, grain direction and edge banding. It nests them onto your sheet sizes to waste less board, and prints labels and hardware lists for the workshop.

Design 3 rooms free Contact us
BWP 18 mm · 2440 × 1220Yield 91.4%
CodePanelSizeEdge
B3-SBase side720 × 5601L 2mm
W1-LWall side720 × 3201L 0.8mm
T1-STall side2150 × 5602L 2mm
How it works

Three steps, no retyping.

  1. 01

    Approve the design

    The approved model already knows every carcass, shelf, back and shutter. Nothing is retyped.

  2. 02

    Optimise the sheets

    Panels are nested onto 8 × 4 ft sheets or your own sizes, respecting grain and blade kerf. Offcuts above your size are saved for reuse.

  3. 03

    Send to the workshop

    Print sheet layouts and panel labels, or export for your panel saw or CNC. The workshop marks panels cut from a tablet.

Inside Cut List

Made for the way studios and workshops already work.

Sheet nesting

Panels nested onto your sheet sizes, with grain locked where a laminate needs it.

Edge-banding schedule

Which edges get 0.8 mm or 2 mm tape, and how many running metres to order.

Panel labels

Labels with project, module, panel code and edges, so assembly on site is not a puzzle.

Hardware list

Hinges, channels, lift-ups, handles and screws counted per module and per project.

Offcut stock

Usable offcuts are kept in stock and used first on the next project.

Saw and CNC exports

CSV for panel saws and optimiser software, DXF for CNC routers on the Marine Grade plan.

Specification

The details.

Everything here works with the rest of Gharpenter. The measured room, design, quote, cut list and orders all read from one project.

Sheet sizes
8 × 4 ft, 7 × 4 ft, or any custom size
Boards
MR, BWR, BWP plywood, MDF, HDHMR, particle board
Kerf and trim
Set per machine
Exports
PDF, CSV; DXF for CNC on Marine Grade
Labels
Standard label printers and A4 sticker sheets
Questions

About Cut List.

  • Included from the BWR Grade plan
  • Workshop and site users at no extra cost
Does the cut list work with our panel saw or CNC?

Panel saw teams usually work from the printed sheet layouts or the CSV export. CNC routers can use the DXF export on the Marine Grade plan.

Can we set our own blade kerf?

Yes. Kerf, edge trim and minimum offcut size are set per machine.

06Handover

The keys are on the counter. Your first three rooms are on us.

Measure, design and quote three rooms in Gharpenter at no cost and with no time limit. Bring your own price list, or start with ours.

Handover checklistRoom 1 of 3
  • Room measured on site
  • Layout drafted and finalised
  • Quote approved by client
  • Cut list sent to workshop
  • Cabinets installed, snags closed
Signed by your studioDesign 3 rooms free

No card needed · Site and workshop users included on paid plans