Wall-by-wall capture
Lengths, heights, ceiling, skirting and beam drops recorded in millimetres against each wall.
HomeSite Measure
01Measure · Site MeasureMeasure a room once. Use it everywhere after.
Walk the site with a phone. Tap each corner, mark the window, the door swing, the gas point and the drain. Gharpenter turns it into a dimensioned plan that the designer, the quote and the workshop all read from.
Kitchen · L-shaped Meter paired
Wall B · length2,440 mm
- Gas point · wall A, 1,410 from corner
- Window · 1,200 × 1,050, sill 1,050
- Drain · under window, 380 from floor
Room closes within 4 mm
How it works
Three steps, no retyping.
- 01
Walk and tap
Pick the room type, then tap each wall as you measure it. Type the reading or pair a Bluetooth laser meter and it fills itself.
- 02
Mark what matters
Drop pins for windows, doors, beams, sockets, gas, water inlet and drain. Add a photo to any pin so nothing is left to memory.
- 03
Close the room
The app checks that the walls add up and flags a gap before you leave site. The plan syncs to the studio the moment you are back on signal.
Inside Site Measure
Made for the way studios and workshops already work.
Laser meter pairing
Readings from common Bluetooth laser meters land straight in the selected field.
Photos on pins
Every pin can hold photos, so the designer sees the exact switchboard or pipe you saw.
Closure check
If the walls do not close within your tolerance, the app tells you which wall to re-check.
Works offline
Basements and new towers rarely have signal. Measure offline and it syncs later.
Site team access
Site supervisors and measurers use the app at no extra cost on any paid plan.
Specification
The details.
Everything here works with the rest of Gharpenter. The measured room, design, quote, cut list and orders all read from one project.
- Units
- Millimetres, with feet and inches shown alongside
- Room types
- Kitchen, wardrobe wall, bedroom, living, bathroom vanity, utility
- Points per room
- No limit; a typical L-shaped kitchen takes 12 to 16
- Devices
- Android and iPhone; tablet layout for site supervisors
- Output
- Dimensioned floor plan and unfolded wall elevations
Questions
About Site Measure.
- Included from the MR Grade plan
- Workshop and site users at no extra cost
Do we need special equipment to measure?
No. A phone and a tape are enough. If you already own a Bluetooth laser meter, pair it and readings fill in automatically.
What happens if a reading is wrong?
The closure check flags walls that do not add up. Any value can be edited later in the studio, and the change is logged.
06Handover
The keys are on the counter. Your first three rooms are on us.
Measure, design and quote three rooms in Gharpenter at no cost and with no time limit. Bring your own price list, or start with ours.
Handover checklistRoom 1 of 3
- Room measured on site
- Layout drafted and finalised
- Quote approved by client
- Cut list sent to workshop
- Cabinets installed, snags closed
Signed by your studioDesign 3 rooms free
No card needed · Site and workshop users included on paid plans